References Dr.-Ing. Dieter Bokelmann
Education
1974 University Entrance Diploma
1975 Military Service
1981 Diplom Master Degree of Engineering, Technical University TU Hannover
1985 Doctor-Degree of Engineering, TU Hannover
Continuing Education (i.a.)
1993 FMEA (BWH Bildungswerk Hattingen GmbH, 45527 Hattingen, Werksstraße 34)
1994 SPC, Certificate of Achievement in Statistical Process Control (GE Aircraft Engines)
1995 Contribution Margin Accounting (Dr. Bauer GMBH, 53332 Bornheim, Neckarstraße 11)
2007 Business Economics for GmbH-Manager (Euroforum Deutschland GmbH, 40459 Düsseldorf))
2009 The Commercial Manager (Forum für Führungskräfte, 65185 Wiesbaden)
2009 Six Sigma Training Black Belt (Kienbaum Management Consultants GmbH, 40474 Düsseldorf)
References
1981-1985 Research Assistent IFUM Institut für Umformtechnik und Umformmaschinen, TU Hannover
1983-1985 Head of Forging Test Area IFUM
1985-1990 Head of Forging Shop Thyssen Henrichshütte, 45527 Hattingen
1990-1996 Head of Forging Shop and Heat Treatment Shop (VSG Vereinigte Schmiedegesellschaft, 45527 Hattingen)
1996-2002 Head of Forging Shop and Heat Treatment Shop (Saarschmiede GmbH, 66333 Völklingen)
2002-2007 Head of Saarschmiede GmbH (Saarstahl AG)
2007-2016 Technical Managing Director (Saarschmiede GmbH)
2016-2018 Technical Consultant (Saarschmiede GmbH, 01.09.2016 - 31.102018)
2018- Self employed Consultant ( 1.11.2018- )
Projects with Consulting Firms (i.a.)
(Company Analysis – Company strategy - Production Planning - Cost Reduction)
2000-2001 GMC Global Management Consulting GmbH (85049 Ingolstadt)
2005-2007 INTRA Unternehmensberatung GmbH (40547 Düsseldorf)
2008-2010 Kienbaum Managements Consultants GmbH (40474 Düsseldorf)
2012-2016 RCG Research & Consulting GmbH (40479 Düsseldorf)
Family - Languages - Hobbies
Family - married, 3 boys, 5 grandchildren
Languages - German, English, French, Dutch
Hobbies – energy saving, handicraft house work, garden work, coast sailing, motorcycle, fishing, travelling, ancestry, philately
Email: d.bokelmann@forging-consulting
ASK2009-265
Bild 1
Bild 5
9 pictures of IFM International Forgemaster-Conference 2003 in Kobe Japan. I explained that with supposed 1/10000 remaining solar energy daily due to greenhouse effect each day leads to 3K increase of world temperature in one century (we are not far from this prediction 20 years ago), see my table publications. The target was to produce high efficient turbines made of special heat resistant steels for high efficient power plants with less combustion of fossil based primary energy. This was the reason for an investment of a new 85MN Press at Saarschmiede GmbH.
Start IFM2003 Kobe
Climate Change
Condensation Trails
Planet Earth Energy Balance
Planet Earth Energy Input and demand
Green House Effect
Temperature Rise by Green House Effect
85MN PRESS
80t MANI
Email: d.bokelmann@forging-consulting.com
https://www.forging-consulting.com/
Expert for forgings for power generation and heavy general machinery equipment
China HFCM 2013
ICRF_2018__Bokelmann_Dieter r Startbild
China HFCM 2019 2
China HFCM 2019
Publications Dr.-Ing. Dieter Bokelmann | ||||
Year | Publication Medium | Title | Author | Author/ co-Auth. |
1984 | Industrieanzeiger Nr.12,2-1984/106,P28-29, Germany | Measuring of forging temperatures with liquid calorimeter vessel - 3 Pages - German | Dr. Dieter Bokelmann | A |
1984 | Industrieanzeiger Nr.63/64,8-1984/106,P33-36, Germany | Hot Plasticity of construction steels - 3 Pages - German | Dr. Dieter Bokelmann | A |
1985 | VDI/ADB-IFUM IDS Hagen Germany, 1985 | Acceptable forging temperatures with drop forging of construction steels -Abstract 6 Pages - German | Dr. Dieter Bokelmann | A |
1985 | IFUM at Technical University Hannover, 1985 | Research about the influence of high forging temperatures by drop forging of construction steels, Dr.-Ing. Dissertation - German - 180 Pages | Dr. Dieter Bokelmann | A |
1986 | Industrieanzeiger Nr.58/59 ,7-1986/108,P55-56, Germany | High forging temperatures with drop forging of construction steels - 2 Pages- German | Dr. Dieter Bokelmann | A |
1991 | International Forgemasters Meeting, 1991, TERNI, Italy | Forging technique for the manufacture of a heavy flywheel with 108t forging weight | Dr. Dieter Bokelmann | A |
1991 | International Forgemasters Meeting, 1991, TERNI, Italy | Manufacturing of D-shaped AL 2219-rings for space Industry | K. Fischer | Co. |
1994 | International Forgemasters Meeting, 1994, Chicago, USA | Forging of heavy continous grain flow (CGF) Crankshafts without intermediate cooling | Dr. Dieter Bokelmann | A |
1994 | German Patent Office, 1994 | Patent DE4222748C2 Manufacturing and Equipment for drop forging of large monoblock-crankshafts with multiple throws from one single bar | Dr. Dieter Bokelmann | A |
1997 | International Forgemasters Meeting, 1997, Pusan, South Korea | Optimization of the forging process of heavy forgings for power generation | Dr. Dieter Bokelmann | A |
2000 | International Forgemasters Meeting, 2000, Wiesbaden, Germany | Optimization of the qualitiy Level of Open Die Forgings by the Introduction of Modern, Innovative Forging Technology | Dr. Dieter Bokelmann | A |
2000 | Journal, Stahl und Eisen, Germany | Optimization of the qualitiy Level of Open Die Forgings by the Introduction of Modern, Innovative Forging Technology | Dr. Dieter Bokelmann | A |
2000 | Journal, Stahl und Eisen, Germany | Zur Situation unserer Schmiedeindustrie- aus technischer Sicht | Dr. Dieter Bokelmann | A |
2001 | Santa Fe | Electroslag Remelting of High-Chromium Steel Ingots of up to 165t Weight | Nikolaus Blaes | Co. |
2002 | 1. International Alloy & special Steels Conference, 2002, Köln, Germany | Manufacturing of Forgings up to 100 mt Shipped Weight in Low and High Temperature Steel Grades for Power Plants | Dr. Dieter Bokelmann | A |
2002 | Journal, Stahl und Eisen, Germany | Vorstellung der neuen 85MN-Freiformschmiedeanlage der Saarschmiede Freiformschmiede GmbH | Dr. Dieter Bokelmann | A |
2003 | Journal, Stahl und Eisen, Germany | High Temperature Steel Forgings for Power Generation Machinery | Dr. Nikolaus Blaes | Co. |
2003 | Journal, Stahl und Eisen, Germany | The new State of the Art 75,85 MN Saarschmiede GmbH Forging Equipment | Dr. Dieter Bokelmann | A |
2003 | International Forgemasters Meeting, 2003, Kobe, Japan | High Temperature Steel Forgings for Power Generation Machinery | Nikolaus Blaes | Co. |
2003 | International Forgemasters Meeting, 2003, Kobe, Japan | The new State of the Art 75,85 MN SAARSCHMIEDE GmbH forging Equipment | Dr. Dieter Bokelmann | A |
2004 | EPRI, USA | Superalloy Forgings for Advanced High Temperature Power Plants | K.H. Schönfeld | Co. |
2004 | EPRI, USA | High Temperature Steel Forgings for Power Generation | Dr. Nikolaus Blaes | Co. |
2005 | Superalloys 2005 | Design and Manufacture of a Very Large Hot-Gas Expander Impeller in Alloy 718 For Highly Corrosive Off-Gas | Dr. Sharad Chandra | Co. |
2006 | Forging Conference of Metal Union , Mai 2006, Hagen, Germany | Introduction of OEE-Key-data at Saarschmiede, 32 sheets, German | Dr. Dieter Bokelmann | A |
2006 | International Forgemasters Meeting, 2006, Sheffield, UK | Determination of Input Data for Fem-Calculation of Hardening Process of Worldwide Largest 17%Cr-2%Ni-Rotorshaft | C. Berger | Co. |
2006 | International Forgemasters Meeting, 2006, Sheffield, UK | Development and Commissioning of a Centrifugal Extraction Hood for Reducing Emissions During Flame Scarfing of Forginga at Saarschmiede GmbH Freiformschmiede, Völklingen | Jörg Poppenhäger | Co. |
2006 | International Forgemasters Meeting, 2006, Sheffield, UK | Selected successful achievements in the European open-die forging industry | Ralf Rech | Co. |
2006 | International Forgemasters Meeting, 2006, Sheffield, UK | Improvement of ut Systems for the Automated Ultrasonic Inspection of Heavy Forgings | Jürgen Meiser | Co. |
2006 | International Forgemasters Meeting, 2006, Sheffield, UK | Largest Turbine Rotors Ever Manufactured from 10 CR-Steels | Nikolaus Blaes | Co. |
2006 | International Forgemasters Meeting, 2006, Sheffield, UK | Manufacturing of the Largest Forged Steam Turbine Rotor Shaft Worldwide in Steel Type 17% CR-2% Ni | Dr.Sharad Chandra | Co. |
2006 | International Forgemasters Meeting, 2006, Sheffield, UK | Selected Successful Achievements by the European Members of the Open Die Forging Committee within the Steel Institute VDEH | Ralf Rech | Co. |
2006 | Journal, Stahl und Eisen, Germany | Selected Successful Achievements in the European Open-Die Forging Industry | Ralf Rech | Co. |
2006 | OPE, Chennai (India) | Heavy Forgings for High-Pressure Applications | Gerd Weides | Co. |
2006 | International Forgemasters Meeting, 2006, Sheffield, UK | Determination of Input Data for Fem-Calculation of Hardening Process of Worldwide Largest Forged 17%CR-2%NI-Rotorshaft | C. Berger | Co. |
2007 | EPRI | High Chromium Steel Forgings for Steam Turbines at | Dr. Nikolaus Blaes | Co. |
2007 | Aachener Stahlkolloquium | Simulation von Eigenspannungen bei Härtung Großer Schmiedeteile | G. Weides | Co. |
2007 | EPRI, Marco Island, (Florida, USA) | High Chromium Steel Forgings for Steam Turbines at Elevated Temperatures | Nikolaus Blaes | Co. |
2008 | HighTec - Abschlusstagung Branchenpolitik Schmiedeindustrie 30.1.2008 Düsseldorf | Speech& Presentation - Saarschmiede - Ein Unternehmen stellt sich vor, 77 sheets, German | Dr. Dieter Bokelmann | A |
2008 | Journal Energy Materials, Volume 2, 2007, Issue 4 | High Chromium Steel Forgings for Steam | Dr. Nikolaus Blaes | Co. |
2008 | MPA Stuttgart | Nickel-Base Alloy Forgings For Advanced High | Dr. Bernhard Donth | Co. |
2008 | International Forgemasters Meeting, 2008, Santander, Spain | Optimisation of the Forging Process of Profiled Discs for Low Pressure Turbine Rotors by FEM Simulation | Gerd Weides | Co. |
2008 | International Forgemasters Meeting, 2008, Santander, Spain | Optimizing Layout Lifetime 40 MN Open Die Forging Press | Christina Berger | Co. |
2008 | MPA-Seminar, Stuttgart | Nickel-Base Alloy Forgings for Advanced High Temperature Power Plants | B. Donth | Co. |
2008 | International Forgemasters Meeting, 2008, Santander, Spain | Installation of New Ultrasonic Facilities for Increasing Automated Inspection Capacity | Jürgen Meiser | Co. |
2008 | International Forgemasters Meeting, 2008, Santander, Spain | Optimisation of the Forging Process of Profiled Discs for Low Pressure Turbine Rotors by FEM Simulation | Gerd Weides | Co. |
2008 | International Forgemasters Meeting, 2008, Santander, Spain | Optimizing the Layout and Lifetime of the New Saarschmiede 40 MN Open Die Forging Press | Christina Berger | Co. |
2009 | LMPC | Calibration Simulation Model Var with Respect to the influence of Helium Cooling | Dr. Jan Terhaar | Co. |
2009 | Journal, Stahl und Eisen, Germany | Fortschrittliche Prüfsysteme für die automatisierte Ultraschall-Prüfung von schweren Schmiedeteilen | Jürgen Meiser | Co. |
2009 | Aachener Stahlkolloquium | (Veröffentlichungen) Forging Visions | M. Baues | Co. |
2009 | LMPC Santa Fe, New Mexico (USA) | Calibration of a Simulation Model for Var with Respect to the Influence of Helium Cooling | J. Terhaar | Co. |
2010 | Stahl und Eisen | Considering the Soldification Structure of Var Ingots in the Numerical Simulation of the Coggings Process | Dr. Jan Terhaar | Co. |
2010 | EPRI | 6th International Conference on Advances in Materials Technology for Fossil Power Plants Advanced Forgings for Highly Efficient Fossil Power Plants | Dr. Nikolaus Blaes | Co. |
2010 | EuroSuperalloys, Wildbad Keuth | Modelling Texturised Cast Structures in the Forging of Superalloys | Jan Terhaar | Co. |
2010 | EPRI, Santa Fe, New Mexico, (USA) | Advanced Forginga for Highly Efficient Fossil Power Plants | Nikolaus Blaes | Co. |
2010 | Superalloy 718, Pittsburgh, PA | Considering the Soldification Structure of Var Ingots in the Numerical Simulation of the Coggings Process | Jan Terhaar | Co. |
2011 | International Forgemasters Meeting, 2011, Pitsburg, USA | Largest Steam Turbine Rotor Ever Manufactured from Nickel Base Alloy | Andreas Diwo | Co. |
2011 | ETD | Manufacturing of advanced rotor forgings for highly efficient fossil power plants | Dr. Bernhard Donth | Co. |
2011 | Parsons | Manufacturing of advanced Rotor Forgings for Highly Efficient Fossil Power Plants | Dr. Bernhard Donth | Co. |
2011 | International Forgemasters Meeting, 2011, Pitsburg, USA | Rotor Forgings for Supercritical and Ultra-Supercritical Fossil Power Plants | Dr. Nikolaus Blaes | Co. |
2012 | Open Forge CCMI, China, 2012 | 18th IFM 2011 - Overview and recent trends, May 28 2012, Zhengzhou, Henan, China, 55 Sheets | Dr. Dieter Bokelmann | A |
2013 | EPRI | Rotor Forging Steam Turbines with High Efficiency | Dr. Nikolaus Blaes | Co. |
2014 | International Forgemasters Meeting, 2014, Tokyo, Japan | Advanced Rotor Forgings Highly Efficient Steam Turbines | Dr. Nikolaus Blaes | Co. |
2014 | ECNDT | Nondestructive Determination of Mechanical Properties of Open-Die | Dr. M. Ewen | Co. |
2017 | IFM International Forgemasters Meeting, 2017, GRAZ, Austria | Development since 2014 in the open die forging industry in Austria, Germany, Sweden and Switzerland mainly in association with the Steel Institute VDEH | Dr. Dieter Bokelmann | A |
2017 | IFM International Forgemasters Meeting, 2017, GRAZ, Austria | Review and recent trends in main topics of IFM-Conferences 1954-2017 and conclusions | Dr. Dieter Bokelmann | A |
2018 | BHM 9/2018, Berg- u. Hüttenmännische Monatshefte, P. 347-354 | Selected publications of 20th IFM: Review and recent trends in main topics of IFM-Conferences 1954-2017 and conclusions | Dr. Dieter Bokelmann | A |
2018 | ICRF Ingot Casting, Rolling and Forging Conference, Stockholm | Recent Trends and main Topics affecting the Open die forging Industry (16.-18. October 2018) | Dr. Dieter Bokelmann | A |
2019 | HFCM Heavy Forging Council Meeting China, national meeting | Lecture - Main Technical Challenges of heavy forging ( 17.-19. September 2019), De Yang, China | Dr. Dieter Bokelmann | A |
2021 | IFM International Forgemasters Meeting, 2021, Chengdu, China | The challenge of perfect void closure forging with optimized FI-Technology, confirmed (11.-16. September 2021) | Dr. Dieter Bokelmann | A |
2021 | IFM International Forgemasters Meeting, 2021, Chengdu, China | Reproducible forging plan layout with innovative software tool, submitted, confirmed (11.-16. September 2021) | Dr. Dieter Bokelmann | A |